An ultra-affordable shop floor CMM for measuring small to medium parts, the Axiom too Manual CMM is available with Y axis travel upto 900mm and is supplied as a complete turnkey package with everything you need to start measuring parts from day one.
The all aluminium bridge structure not only ensures that the Axiom too has low inertia and high acceleration to get the job done quickly, but also that the temperature of the machine rapidly follows the temperature of the room, ideal when the CMM is not housed in a controlled environment. Temperature compensation in the software reports results as if they had been measured at 20°C/68°F
Our most popular manual probe upgrade is the Renishaw MH20i manual indexing probe.
For more help selecting the right probe for your application, view our probe head comparison table.
|Axis Travel (mm)||X 640
Y 600, 900
|Overall Size (mm)||X 1040
Y 900, 1200
|*Volumetric Accuracy||TP20 (2.4 + 0.4L/100) µm|
|**Optimum Temp Range||18 - 22°C|
|Operational Temp Range||0 - 45°C|
|Table||Honeycomb aluminium & granite or solid granite|
|Table Load Capacity||300kg (Honeycomb) or 500kg (Solid)|
|Air Consumption||50 l/min (1.8 cfm)|
|Required Air Pressure||5 bar (60 psi)|
*Maximum Permissible Error MPEE according to 10360-2, 2009 within the thermal limits defined for optimum temperature range. **Installation environmental thermal limits: Rate of change <1°C/hr and <2°C/24hr. Temperature gradient <1°C/m
"Due to the Axiom too's accuracy we can now measure components to much tighter tolerances."